3k carbon fiber fabric twill 200 gsm (unformed) 100 cm wide x 100 cm

CARBON FIBER FABRIC TWILL 200 gsm dimensions selection 100cm x 100cm (100cmx150cm) :

Our best-selling carbon fibre fabric reinforcement. This premium quality 200g 2x2 twill weave cloth is the ultimate all-rounder and has the exact 'classic' appearance associated with carbon fibre.

200g is the perfect weight to use as a surface layer on heavier laminates or just in multiple layers of itself on lighter laminates. If you're unfamiliar with carbon fibre weights, weaves and other specifications, this fabric is very likely to be what you need!

Wide:Available in 1m, 1.25m and 1.5m widths. Sold by the linear metre.

Available Gsm:200gsm 220gsm 240gsm 280gsm

Application:

Premium quality 3k woven carbon fibre fabric reinforcement suuitable for a wide range of high performance composite reinforcement applications including hand-lamination, vacuum bagging, resin infusion and skinning.

Important: Changes Resulting from Global Fibre Shortages

As a result of severe global shortages of carbon fibre, where even possible, we are having to use a range of different fibre sources and weavers in order to keep some 3k carbon fabrics in stock. As a result, some slight variation in the appearance and behaviour of the reinforcement is now possible.

The global fibre shortages are also resulting in a significant increase in the cost of what fibre is available. Whilst we expect that these very high prices will be only temporary, and we are absorbing as much of the increase as possible, we have been forced to increase prices for carbon fibre fabrics until the situation improves.

Typical Uses

2/2 twill weave fabric at the 200gsm weight is the most commonly used carbon fabric of all. It is suitable for use in wet-lay, vacuum bagging and resin infusion manufacture as well as for use as a single surface layer where parts are being made to look like carbon fibre (skinning).

When using only carbon fibre reinforcement in a part you should expect to use several layers of this fabric in each part. None-structural components like body panels and covers will typically require 3-6 layers of a carbon fibre cloth of this weight.

For any application where the best possible visual appearance is required then take a look at our  2/2 Twill fabric that has been partially impregnated with a resin binder on the reverse side. This resin binder keeps the weave perfectly aligned during handling an positioning in the mould for the most critical cosmetic applications.

Sales of related products:

Chopped Carbon Fiber 10mm (carbon fiber forged)

Epoxy resin clear 2:1 ratio mixing

Vapor mask for your protection toner for resin colorant carbon shears (scissor) stainless foam brush

✔️Mould Making Kits Polyester resin Fibermatts Gelkotes Modeling Clay Release Wax